PUBLICATIONS

A. Journal Papers

1.  Haerian, A., Mechanical Properties off WC-Co Alloys Produced from Sub-micron Powder; Iranian Journal of Science & Technology, Vol. 8, No. 4 (1980)

2.  Haerian, A. and Shima, Susumu, Fracture Toughness of WC-Co Alloys Pre-cracked by Spark Erosion Technique; Journal of Japan Society of Powder & Powder Metallurgy, Vol. 33, No.4 (July 1984), pp. 204-209

3.  Haerian, A., Variation of Mechanical Properties of WC-Co Alloys with Microstructure; Engineering Fracture Mechanics, Vol. 24, No. 1 (1986), pp. 97-102

4.  Miura, S., Haerian, A., Hashimoto, S., On the Serrated Yielding in Cu-14.1 at.% Al  Polycrystals; Journal of Materials Science. Vol. 22, (1987), pp. 3446-3452

5.  Haerian, A., Effect of EDM Variables on KIC of Spark-Machined WC-Co Fracture Toughness Specimens; Iranian Journal of Science & Technology, Vol. 13, No.1, (1989) pp. 59-66

6. Haerian, A., and Oraee, K. Engineering Economy, an Important Tool in Evaluating Projects, Journal of the Faculty of Engineering, Ferdowsi University of Mashhad, Vol. 1. No. 2, (autumn 1989), pp. 87-100

7.  Haerian, A., Non-Destructive Evaluation of Mechanical Properties of WC-Co Alloys, Refractory Metals and Hard Materials, (June 1989), pp. 121-124

8. Haerian, A., Sharifi, E. and Gharachahi, J.,  Evaluation of Some Physical and Mechanical Properties of Tissue Conditioning Materials; The Journal of the Dental College, Shahid Beheshti Medical Science University, No. 12, (July 1991), pp. 15-23

9.  Oraee, H. and Haerian, A., Manpower Constraints in the Industrial Recovery of Post-War Iran; Journal of the 3rd World Science, Technology and Development Forum, Vol. 9 Nos. 1&2, (April/ August 1991), pp. 151-160

10. Haerian, A., Sharifi, E. and Jahanian , R., Variation of Physical and 10. Mechanical Properties of Acrylic Materials Used for Base of Dentures; The Journal of the Dental College, Shahid Beheshti   Medical Science University, No. 15, (June 1992), pp. 11-16 (August 1991), pp. 151-160

11. Haerian, A., Malekzadeh, G. and Haj-Hosseini, H., Setting Strategy for Scientific and Technological Research; Rahyaft No. 22 (August 2000), pp. 38-47

     B. Conferences

1. Haerian, A., Use of Fracture Mechanics in Evaluating Toughness of Hard Metals; First Engineering Gathering, Pahlavi University, (21-24 January 1978); Shiraz, Iran

2.  Haerian, A., Feasibility Study of First  Powder Metallurgy Plant in Iran, Metallurgy Seminar; Jehad Daneshgahi (19-22 February, 1980), Tehran, Iran

3.  Haerian, A., New Phases in W-Co-C Systems; 2nd Iranian Congress in Chemistry and Chemical Engineering; Ferdowsi University of Mashhad (15-18 September 1987), Mashhad, Iran

4.  Haerian, A., Development of Powder Metallurgy Technique in Parts Production; First Powder Metallurgy Seminar; Imam Hossein University (9-10  March 1989), Tehran, Iran

5.  Haerian, A., Non-Destructive Evaluation of Mechanical Properties of WC-Co Alloys, 1988 International Conference & Exhibition; (5-10 June 1988), Orlando, USA

6.  Haerian, A., Carbon Deficient Phases in W-Co-C Systems; International conference on Materials by Powder Technology/ PTM 93; (23-26 March, 1993), Dresden, Germany

7.  Haerian, A., and Arvand, Comparison of Production and Energy Cost of Different Forming Methods with PM; Production and Manufacturing Engineering Conference; Amir Kabir University of Technology, (13-14 October 1993)Tehran, Iran

8. Arvand, A. and Haerian, A., Sintered Valve Spring Collar Made of Fe-Ni-Mo-Cu Alloy, 1994 Powder Metallurgy World Congress & Exhibition; (6-9 June, 1994), Paris, France

9.  Arvand, A. and Haerian, A., P/M Bucket Tappet Made of Two Different Steel Powders; 19th World Congress on Powder Metallurgy and Particulate Materials; (16-21 June, 1996), Washington, DC, USA

10. Haerian, A., Doulaee, A. , Mosleh, N. & Fotohiapour, P., Shape Optimization of Connecting Rod Using Finite Element Analysis; 19th World Congress on Powder Metallurgy and Particulate Materials; (16-21 June, 1996), Washington, DC, USA

11. Two Piece P/M rocker Arm Substituted for the Cast Type; 19th World Congress on Powder Metallurgy and Particulate Materials; (16-21 June, 1996), Washington, DC, USA

12. Haerian, A., Mazinani, M., Arvand, A., and  Ghambary, M., Use of Liquid Phase Sintering in Production of a New High-Alloy Steel with Good Wear Properties; 5th International Symposium on Advanced Materials;(21-25October 1997), Islamabad, Pakistan

 13. Haerian, A., Mazinani, Use of Liquid Phase Sintering in Production of a New High-Alloy Steel with Good Wear Properties; 5th International Symposium on Advanced Materials; (21-25October 1997), Islamabad, Pakistan

14. Haerian, A., Vahdati, J. Amini Mashhadi, H. and Arvand, A., Effect of MnS on Mechanical Properties of PM Copper Steels; 2nd International Congress on Powder Metallurgy for Automobile; (22-24 February 2002) New Delhi, India

15. Haerian, A., and Arvand, A. Hot Compaction of Clutch Bearing Made of Steel Powder; 2nd International Congress on Powder Metallurgy for Automobile; (22-24 February 2002) New Delhi, India

16. Haerian, A.,  Amini Mashhadi, H., and Vahdati, J.  Effect of Composition on Mechanical Properties of Copper Steel Parts Made by Powder Forging, 2002 World Congress on Powder Metallurgy and Particulate Materials (June 16-21, Orlando, USA (paper accepted for presentation)

C. Books translated into Farsi

1-5  Haerian, A.; Materials and Processes in Manufacturing by E.,         Paul DeGarmo, 4th Edition, Addison Wesley (1978), [translation in    5 volumes]

6,7- Haerian, A.; Engineering Mechanics  by R.D. Snyder and E. F.          Byars (1973) McGraw Hill, Inc. [translation in 2 volumes]

8-    Haerian, A., Farshchi, F.; Manufacturing Technology by J. R.           Lindbeck M .W. Williams and R.M. Wygant Prentice Hall, (1990)

9-    Haerian, A; Introduction to Mechanical Properties of Materials         by Melvin M. Eisenstadt, Macmillan (1971)

10-  Haerian, A.; Testing of Materials by Vernon John

11-15 Haerian, A.; Farshchi, F., and Khajehpour, A. Materials and    Processes in Manufacturing by E., Paul DeGarmo, Kohser, R.       and Temple, B.J.  7th Edition, Darvic Associates (1988)  [translation in 5 volumes]

16-   Haerian, A.; and Mazinani, M. Controlled Atmospheres for Heat Treatment by Nemenyi, R.

         Materials and Processes in Manufacturing by E., Paul  

17- Haerian, A. and Fazeli, F. Thermodynamics of Materials by   Ragone, D.V., Cambridge University Press 1995

18-22 Haerian, A., Materials and Processes in Manufacturing by E. Paul DeGarmo, Kohser, R. and Temple, B.J. 8th Edition, Prentice Hall (1997) [translation in  5 volumes]

23- Haerian, A., Haddad, M. and Fazeli, F.   Selection of Materials for  Engineering Design by Farag, M. M., Prentice Hall (1997)

 24- Haerian, A. and Haddad, M. Composite Materials: Engineering and science, Mathews, F. L., and Rawlings R.D., Wood Head Publishing Ltd. (1999)

25- Haerian, A. and Khoddam, S.  ISO 9000 and Beyond

RESEARCH PROJECTS

1- Evaluation of Amalgam Powder Produced by Sinalloy  Research carried out for Mashhad School of Dentistry and Sinalloy Co. (1992-93)

2- Development of Powder Forging Technique for Production of  Differential Idler Wheels; Research carried out for Iranian Development and Renovation Organization (Ministry of Mines and Industry) and Mashhad Powder Metallurgy Co. (1998-2000)

3- Development of Warm Compaction Technique for Parts Production; Research carried out for National Research Council (1999-2001)

4- Development of  Sintering Technique for Production of Composite Cam Shafts; Research carried out for Iranian Development and Renovation Organization (Ministry of Mines and Industry) and Mashhad       Powder Metallurgy Co. (1999-2002)