Dr. Seyed Mojtaba Zebarjad

  Assistant Professor

 

 Department of Materials Science and  Engineering

 Ferdowsi University Of  Mashhad (IRAN)

 Phone: (+98511) 8763305

 Fax:      (+98511) 8763305

 E-mail: zebarjad@ferdowsi.um.ac.ir

 

Education

Current Research Interests

Professional Positions

Teaching

Master and Ph. D Theses Supervised

Current Research Projects

Publications (Books) (Papers) (Proceeding) (Technical Report)

Education:

  • PhD  : Material Science and Engineering, Sharif University of  Technology, Tehran, Iran.

  • M.S. : Material Science and Engineering, Shiraz University, Shiraz, Iran.

  • B.S.  : Material Science and Engineering, Shiraz University, Shiraz, Iran.

Current Position and Responsibilities

  • Head of Dept. Materials Science and Engineering, Engineering Faculty, Ferdowsi university of Mashhad

  • Member of Center for Nanotechnology of Ferdowsi university of Mashhad

  • Member of Editorial Board of Journal of School of Engineering of  Ferdowsi university of Mashhad

Current Research Interests

  • Nanocomposites

  • Advanced Materials

  • Dental Materials

  • Mechanical Properties of Materials

  • Polymer

  • Metal Forming

Professional Positions

  • Visiting Scientist, Pisa University, Pisa, Italy, 2000-2001.

  • 2002-Present, Assistant Professor of Materials Science and Engineering, Department of materials science and engineering, Engineering faculty, Ferdowsi University.

 

Teaching

Undergraduate Courses

  • Fundamentals of Metal Forming

  • Die Design

  • Advanced Materials

  • Polymers

  • Mechanical Properties of Materials

Graduate Courses

  • Dislocation theory

  • Composites

  • Dental Materials

Master and Ph. D Theses Supervised

  • Production of metallic foam and investigation of its properties.

  • Effect of aspect ratio of SiC on fracture toughness of Al based composites

  • Production of Epoxy/Nano tube carbon Nanocomposite and investigation of its properties

  • Production of PE/Nano tube carbon Nanocomposite using ball milling method

  • Investigation on creep behavior of Epoxy/Nano tube carbon Nanocomposite

  • Production of Al/Al2O3 Nanocomposite using ball milling method

Current Research Projects

  • Production of Al/SiC Nanocomposites and Investigation of Its Properties.

  • Production of Self-Cleaning Glasses Using Nanotechnology

  • Production of anti-scratch coating using Nanotechnology

  • Production of PE nanocomposite film and investigation of its properties

  • Production of Fe-SiC Nanocomposite and investigation of its properties

  • Effect of mechanical works on thermodynamic properties of HDPE

Publications

Books

  1.  Metal Forming, Ferdowsi University of Mashhad Press,2006, First Edition.

Journal Papers

  1. S. M. Zebarjad, R. Bagheri, A. Lazzeri ,“PP/EPR/GF hybrid composites part I: deformation mechanism” Plastic, Rubber and Composites, Vol 30, No. 8, 2001.

  2. S. M. Zebarjad, A. Lazzeri ,R. Bagheri, M. Frunchi and S.M. Seyed Reihani,“Role of interface in deformation mechanism of short-glass fiber reinforced polypropylene” Journal of Materials Science Letters, Vol 21, 2002, 1007.

  3. S. M. Zebarjad, R. Bagheri, A. Lazzeri, S. M. Seyed Reihani and M. Frunchi,“Investigation of deformation mechanism in PP/GF composite", Journal of applied polymer science Vol 87, (2003), 2171-2176.

  4. S. M. Zebarjad, A. Lazzeri, R. Bagheri, S. M. Reihani and M. Frunchi,“ Fracture mechanism under dynamic loading of elastomer-modified polypropylene" Materials Letters 57 (2003) 2733– 2741.

  5. S. M. Zebarjad, A. Lazzeri, R. Bagheri, “Fracture behaviour of isotactic polypropylene under static loading condition” Materials and Design 24, (2003), 105-109.

  6. S. M. Zebarjad, R. Bagheri, A. Lazzeri,“Deformation, Yield and Fracture of Elastomer-Modified Polypropylene” Journal of Applied Polymer Science, Vol. 90, 3767–3779 (2003).

  7. S.M.Zebarjad, “The influence of GF on fracture behavior of ipp”, Materials and Design, 24, 2003, 531-535.

  8. S. Serajzadeh, A.K. Taheri , S. M. Zebarjad, “The effect of carbon on the restoration phenomena during hot deformation of carbon  Steels” Z. Metallkd. 94 (2003) 8.

  9. S. M. Zebarjad, R. Bagheri, A. Lazzeri,“PP/EPR/GF hybrid composites part II: fracture mechanism” Plastic, Rubber and Composites, Dec 2003, Vol 23, no.10, 439-444.

  10. S. Serajzadeh, S.M.Zebarjad, “Modelling the Flow Behavior of Steel at Non-isothermal Condition”. Materials Science and Technology, August 2003, Vol 19, 1065-1069.

  11. S. M. Zebarjad, M. Tahani, S. A. Sajjadi,"Influence of filler particles on deformation and fracture mechanism of isotactic polypropylene",Journal of materials processing and technology, 2004, 155-156C pp. 1459-1464

  12. S.M.Zebarjad, R.bagheri, A.Lazzeri, S. Serajzadeh,“Dilatational shear bands in rubber- modified isotactic polypropylene” ,Materials and design, 25, 2004, 247-250.

  13. S.Serajzadeh , S.M.H. Mirbagheri , A.Karimi Taheri , S.M. Zebarjad, "Modelling of metal .ow during hot forging with regard to microstructural aspects",International Journal of Machine Tools & Manufacture, 2004, Vol 44 1537–1545.

  14. S.A. Sajjadi, S. Nategh, M. Isac, S.M.Zebarjad,"Tensile deformation mechanism at different temperature in the Ni-based super alloy GTD-111",Journal of materials processing and technology, 2004, 155-156C pp. 1900-1904.

  15. S. M. Zebarjad, S. A. Sajjadi, M. Tahani,"Modification of fracture toughness of isotactic polypropylene with a combination of EPR and CaCO3 particles",Journal of materials processing and technology, (in press).

  16. S.A. Sajjadi, S.M.Zebarjad, R.I.L. Guthrie, M. Isac,"Microstructure evolution  of high performance Ni base super alloy GTD-111 with heat treatment parameters",Journal of materials processing and technology, (in press).

  17. Lazzeri; S.M. Zebarjad; M. Pracella; K. Cavalier; R. Rosa,"Filler Toughening of Plastics. Part 1 - The Effect of Surface Interactions on Physico-Mechanical Properties and Rheological Behaviour of Ultrafine CaCO3/High Density Polyethylene Nanocomposites",Polymer 46 (2005) 827–844.

  18. M.Tahani, A.Nosier, S.M.Zebarjad, "Deformation and stress analysis of circumferentially  fiber- reinforced composite disks", International Journal of solids and structures 2005, 42, 2741-2754.

  19. S.M.Zebarjad, S.A.Sajjadi, "Microstructure evaluation of Al-Al2O3 composite produced by mechanical alloying method", Materials and Design (in press).

  20. M. Homayonifar, S.M. Zebarjad, "Investigation of the effect of matrix volume fraction on fiber  stress distribution in polypropylene fiber composite using a simulation method", Materials and design (in press).

  21. S.M.Zebarjad, S.A.Sajjadi, "Dependency of physical and mechanical properties of mechanical alloyed Al–Al2O3 composite on milling time" Materials and design (in press).

  22. سيد عبدالکريم سجادی، سيد مجتبی زبرجد "نقش متغيرهای فرآيند تبلور مجدد روی رفتار ناهمسانگردی فولاد نورد شده  St 52 " مجله علمی- پژوهشی  دانشکده مهندسی, دانشگاه فردوسی مشهد (در انتظار چاپ)

  23. S. Sahebian, S. M. Zebarjad, S. A. Sajjadi, Z.Sherafat, A. Lazzeri,"Investigation on effect of both uncoated and coated calcium carbonate on fracture toughness of HDPE/ CaCO3 nanocomposites" Journal of Applied Polymer Science" (Accepted).

  24. M. Homayonifar, S.M. Zebarjad, S. A. Sajjadi, A. Saatian, "Investigation on dependency of mechanical characteristics of an alloyed steel on both strain rate and microstructure" Journal of Strain Analysis for Engineering Design (In Press).

  25.  S.M.Zebarjad, S.A.Sajjadi "On the strain rate sensitivity of HDPE/nanocomposites" Journal of Applied Polymer Science (Submitted).

  26. S.M.Zebarjad, S.A.Sajjadi, J. Jafari " Effect of Pre-strain on Microstructure of Ni-Ti Orthodontic Archwires" Dental Materials (Submitted).

  27. H. Naji, S.M.Zebarjad, S.A.Sajjadi, "The Effects of Volume Percent and Aspect Ratio of Carbon Fiber on Fracture Toughness of Reinforced Aluminum Matrix Composites"  Materials and structures (Submitted)

  28. M. R. Jafari, S.M.Zebarjad, F. Kolahan "Prediction of Extrusion Behavior of A356 Aluminum Alloy at Semi-Solid State Using Finite Volume Method"  Materials and structures (Submitted)

     

Proceedings

  1. S.M.Zebarjad, M.M.Moshksar, "Investigation of effective parameters on milling of metallic Powders", Proceeding of The First Congress of Non-Ferrous Metals in Iran, Kerman, pp. 57-69, 29-31 Oct. 1996 (in Persian).

  2. S.M.Zebarjad, R.Bagheri and M. Frunchi, " Investigation of tensile properties of PP/GF composite. Second. Annual Meeting of Iranian Society of Metallurgical Engineers, 20-22 Oct. 1998, Sharif University, Tehran, Iran (in Persian).

  3. S.M.Zebarjad, R.Bagheri and S. M. Seyed reihani, " Effect of calcium carbonate on tensile properties of PP", Third. Annual Meeting of Iranian Society of Metallurgical Engineers, 20 Oct. 1999, Esfahan University, Esfahan, Iran (in Persian).

  4. S.M.Zebarjad, R.Bagheri and S. M. Seyed reihani and M. Frunchi, "Investigation of mechanical properties of polypropylene/talc composite", Journal of metallurgy, Oct. 2000 (in Persian).

  5. ُS.M.Zebarjad, S.A. Sajjadi, M. M. Moshksar , " Production of Al/Al2O3 composite by using mechanical alloying method and investigation of its properties",. Journal of Aluminum, Dec 2001 (in Persian).

  6. R.Bagheri, S.M.Zebarjad,, B. Akbari, S.M.H. Fadaki, "Antistatics and plastic industries", Journal of Baspar, Apr, 2003. (in Persian)

  7. B. Akbari , S.M.Zebarjad , R.Bagheri,, S.M. H. Fadaki, "Polypropylene and its role in automotive industries"., Journal of Sanat Khodro, Sept 2003, (in Persian)

  8. S.M.Zebarjad, R.Bagheri, B. Akbari, S.M.H. Fadaki, "Antistatics and its role in automotive trim parts". (in Persian) (in Press)

  9. S. M. Zebarjad, R. Bagheri, M. Frunchi, “Role of interface in mechanical properties of short-glass fiber reinforced polypropylene” International conference of polymer, Amirkabir university, 1379.

  10. S. M. Zebarjad, R. Bagheri, S. M. Seyed Reihani, “Failure mechanism in elastomer-toughened polypropylene” International conference of polymer, Amirkabir university, 1379.

  11. S. M. Zebarjad, R. Bagheri, A. lazzeri, G. Levita and S.M. Seyed Reihani, “Toughening mechanism in polypropylene/EPR blends” Euromat, Rimini, Italy, June 2001.

  12. S. M. Zebarjad, R. Bagheri, A. Lazzeri, G. Levita and S. M. Seyed Reihani, “Influence of Spherulitic Microstructure on Deformation Mechanism in Isotactic Polypropylene” International PMSE, Orlando USA, 2002.

  13. S. M. Zebarjad, R. Bagheri, G. Levita, A. Lazzeri,  "Meccanismo di tenacizzazione nei copolimeri etilene/propilene" (in italian)” AIMAT conference, Italy, Sept 2002.

  14. A. Cateni, S. Ignelzi, S. Mollica, S. M. Zebarjad, A. Lazzeri, “Polymer nano-composites: the effects of surface interactions and particle size on fracture toughness” Euromech Conference, Austeria, July 2002.

  15. S. M. Zebarjad,  “Role of calcium carbonate on fracture behavior of isotactic polypropylene” AMPT 2003, 8-11 July, Dublin, Irland.

  16. S. M. Zebarjad, R. Bagheri, A. Lazzeri,  “Dependency of impact properties of PP/CaCO3/EPR hybrid composite” on EPR/CaCO3 ratio., ISPT 2003, Iran.

  17. S. M. Zebarjad, R. Bagheri, A. Lazzeri, “Effect of EPR and GF on Fracture Mechanism of Polypropylene”, ISPT 2003, Iran.

  18. S.A.Sajjadi, S.M. Zebarjad, “Microstructure Evolution of High-Performance Ni-Base Superalloy GTD-111 After Different Heat Treatments” AMME 2003, Poland.

  19. S. M. Zebarjad, S.A.Sajjadi, R. Bagheri, A. Lazzeri, M. Tahani, Modification of fracture toughness of isotactic polypropylene with a combination of EPR and CaCO3 particles, AMME 2003, Poland

  20. M. Tahani, A. Nosair, R. Pazhand  and S.M.Zebarjad, "Analytical Stress Analysis of Rotating Composite Beams Due to Material Discontinuities", The forth Asian-Australian conference on composite materials, 6-9 July 2004, Sydny Australia

  21. S. M. Zebarjad, M. Jafari, F. Kolahan, "Prediction of Extrusion Behavior of A356 Aluminum Alloy at semi-solid state using finite volume method, Annual Meeting of Iranian Society of Mechanical Engineers, Isfahan, 2005.

  22.  S. A. Sajjadi, S. M. Zebarjad, Study of Fracture Mechanisms of a Ni-Base Superalloy at Different Temperatures, 12th International Scientific Conf. "Achievements in Mechanical & Materials Eng." (AMME 2006) Gliwice, Poland, Silesian Uni. of Technology of Gliwice, 4-8 June. 2006

  23. S. M. Zebarjad, S. A. Sajjadi, M. Tahani, A. Lazzeri A study on thermal behavior of HDPE/CaCO3 nanocomposites, 12th International Scientific Conf. "Achievements in Mechanical & Materials Eng." (AMME 2006) Gliwice, Poland, Silesian Uni. of Technology of Gliwice, 4-8 June. 2006.

  24. 24-حسين ايزدي, سيد مجتبي زبرجد, سيد عبدالکريم سجادي, محمد رضايي, وحيد ظهور کريمي, " بررسي اثر ذرات نانو SiC روي پايداري ابعادي نانوکامپوزيت پايه آلومينيوم" ارايه شده به دهمين کنگره سالانه انجمن مهندسين متالورژی ايران

    25- لاله راه انجام ، اكرم هاشمي نژاد، سيد مجتبي زبرجد، سيد عبدالكريم سجادي, " بررسي اثر مقدار مس برروي خواص مکانيکي و ريزساختار ماده دنداني آمالگام" ارايه شده به دهمين کنگره سالانه انجمن مهندسين متالورژی ايران

    26- سمانه صاحبيان، سيد مجتبي زبرجد، سيد عبدالکريم سجادي، سيد حامد موسويان "بررسي تاثير نانو ذرات کربنات کلسيم بر خواص ترموديناميکي زمينه پلي‌اتيلن " ارايه شده به دهمين کنگره سالانه انجمن مهندسين متالورژی ايران

    27- مهين هوشيار صادقيان، سيد مجتبی زبرجد، سيد عبدالکريم سجادی, "بررسی پارامترهای موثر در توليد نانوکامپوزيت پايه اپوکسی تقويت شده با نانولوله های کربنی چند ديواره " ارايه شده به دهمين کنگره سالانه انجمن مهندسين متالورژی ايران

    28- سيد محمد حسين مدرسي, سيد مجتبي زبرجد, سيد عبدالکريم سجادي و عاطفه نبوي ,  توليد کامپوزيت پايه مس تقويت شده با ذرات آلومينا با استفاده از روش آسياب کاري مکانيکي و ارزيابي خواص مکانيکي آن"  ارايه شده به دهمين کنگره سالانه انجمن مهندسين متالورژی ايران

    29-  عاطفه نبوي, سيد عبدالکريم سجادي , سيد مجتبي زبرجد و سيد محمدحسين مدرسي "توليد کامپوزيت پايه مس تقويت شده با ذرات Al2O3   و SiC با استفاده از روش آسياب کاري مکانيکي و ارزيابي ميکروسکوپي ريز ساختار آن" ارايه شده به دهمين کنگره سالانه انجمن مهندسين متالورژی ايران

    330-  ميلاد حيدري قلعه , ميلاد مجتهدي , سيد مجتبي زبرجد , سيد عبدالکريم سجادي "اثر کار مکانيکي بر ناهمسانگردي ورق آلومينيوم 7020" ارايه شده به دهمين کنگره سالانه انجمن مهندسين متالورژی ايران

 

Scientific Report

  1. S.M.Zebarjad, A.Lazzeri, “Role of Surfactant in Crystallization and Thermal Behavior of HDPE/CaCO3 Nanocomposites".

  2. S.M.Zebarjad, A.Lazzeri, “Role of Surfactant on Impact Properties of HDPE/10Vol% CaCO3 Nanocomposites".

  3. S.M.Zebarjad, A.Lazzeri, “Microscopic Evaluation of HDPE/10Vol%CaCO3 Nanocomposites”.

  4. S.M.Zebarjad, A.Lazzeri,  “Role of surfactant in Tensile Properties of HDPE/CaCO3 Nanocomposites”.

  5. S.M.Zebarjad, A.Lazzeri,  “Role of Surfactant on Volume Changes in HDPE/10Vol% CaCO3 Nanocomposites During Stretching”.

  6. R. Bagheri, S.M.Zebarjad, B. Akbari, B. Tekieh maroof, " Study the state of the art of nanocomposites " New industry organization, Industry ministry, 2003 (in Persian).

  7. R. Bagheri, S.M.Zebarjad, B. Akbari, H. Shayani pour, "The consumption trend of polymers in transportation industry" New industry organization, Industry ministry, 2003.(in Persian).

  8. S.M.Zebarjad, "Role of petrochemical downstream industries in automotive industry", The first Petrochemical downstream industries conference, 14 July 2004, Mashhad, Iran. (in Persian).

9-  بررسی علت تخريب و ايجاد ترک و سوختگی زودرس در نازلهای رديف يک واحدهای گازی فريم– 9  (نيروگاه شريعتی)

10 -  بررسی ارتباط بين ريزساختار و عمر پره‌های متحرک رديف اول توربين گازی فريم – 5 (نيروگاه شيروان)

11-  بهينه سازی کارکرد قالبهای فورج فولادهای گرمکار   (مشترک) (شرکت آهنگری پارت سازان)

12- بررسی علل ترک خوردگی اگزوز نيروگاه سيکل ترکيبی (نيروگاه نيشابور)

 

 

 

All rights reserved by Ferdowsi University of Mashhad